Prashaant Steel & Alloys

INCOLOY alloy 865 (UNS S35115) is an economical, high-performance corrosionresistant alloy. Developed from the technology of INCOLOY alloy 864, it improved strength, ductility and fatigue resistance at reduced cost. The alloy was designed for automotive applications such as flexible couplings and exhaust gas recirculation (EGR) components. However, with its excellent combination of strength and corrosion resistance, alloy 865 may be evaluated for chemical processing and marine applications.

STANDARD PRODUCT FORMS
Sheet and strip.

MAJOR SPECIFICATIONS
UNS S35115
ASTM A240/A480

LIMITING CHEMICAL COMPOSITION, %
Ni.......10.0 – 22.0
Cr.......23.0 – 25.0
Mo.....1.50 – 2.50
N........0.20 – 0.30
Mn.......... 1.0 max.
C........ 0.020 max.
P......... 0.045 max.
S........ 0.015 max.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,Ib/in3.........................................................................0.276
g/cm3..........................................................................7.64
Melting Range,°F...................................................2484 –2535
°C...................................................1362– 1390
Permeability at 200 Oersted (15.9kA/m).......................1.002
Electrical Resistivity, ohm •circmil/ft................................ 553
μΩ•m.....................................................92
Young's (Tensile) Modulus,ksi................................. 28.7 x 103
GPa........................................... 195
TYPICAL MECHANICAL PROPERTIES

A nickel-iron-cobalt alloy with additions of niobium and titanium for precipitation hardening. It has the low coefficient of expansion and high strength of INCOLOY alloy 903 but with improved notch-rupture properties at elevated temperatures. Used for components of gas turbines including seals, shafts and casings.

STANDARD PRODUCT FORMS
Round bar and forging stock.

MAJOR SPECIFICATIONS
UNS N19907

LIMITING CHEMICAL COMPOSITION, %
Ni.......35.0 – 40.0
Fe.......Remainder
Cu.....12.0 – 16.0
Nb..........4.3 – 5.2
Ti............1.3 – 1.8
Al............ 0.2 max.
Si.......0.07 – 0.35

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,Ib/in3.........................................................................0.301
g/cm3.........................................................................8.33
Melting Range,°F....................................................2440– 2550
°C....................................................1335– 1400
Specific Heat,Btu/lb•°F.....................................................0.103
J/kg•°C............................................................431
Curie Temperature,°F................................................750 –850
°C................................................400 –455
Coefficient of Expansion, 77 – 800°F, 10-6in/in •°F........4.3
25 – 427°C, μm/m •°C............. 7.7
Thermal Conductivity, Btu •in/ft2•h•°F............................ 103
W/m • °C.......................................... 14.8
Electrical Resistivity, ohm •circmil/ft................................ 419
μΩ•m...............................................0.697
TYPICAL MECHANICAL PROPERTIES

INCOLOY alloy 945 (UNS N09945) is a corrosionresistant, high strength, age hardenable nickeliron- chromium alloy. Its nickel content provides resistance to stress corrosion cracking. Its combination of nickel, molybdenum and copper gives it outstanding resistance to attack by reducing media, while its high chromium content provides resistance to oxidizing environments. Molybdenum and niobium provide resistance to localized attack such as pitting and crevice corrosion. Niobium, titanium and aluminum react upon heat treatment to precipitate gamma prime and gamma double prime phases that give the alloy its high strength. With this highly desirable combination of properties, alloy 945 is suitable for many demanding applications in oil and gas service. With resistance to sulfide-induced stress corrosion cracking and corrosion in hydrogen sulfide, alloy 945 is ideal for fabrication of down-hole and surface well equipment including tubular products, valves, hangers, landing nipples, tool joints and packers. When cold worked and aged, the alloy provides the properties required for fasteners, pump shafting and high strength piping.

STANDARD PRODUCT FORMS
Bar, forging stock, tubes.

MAJOR SPECIFICATIONS
UNS N09945
NACE MR0175 (Approved to Level VII andLevel VI at 450°F)

LIMITING CHEMICAL COMPOSITION, %
Ni.......45.0 – 55.0
Cr......19.5 – 23.0
Fe............ Balance
Mo..........3.0 – 4.0
Cu..........1.5 – 3.0
Nb..........2.5 – 4.5
Ti............0.5 – 2.5
Al......... 0.01 – 0.7
C..... 0.005 – 0.04
Mn.......... 1.0 max.
Si............ 0.5 max.
P...........0.03 max.
S........ 0.030 max.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,Ib/in3.........................................................................0.281
g/cm3.......................................................................7.777
Melting Range,°F...................................................2317 –2510
°C...................................................1270 – 1377
Permeability at 200Oersted.............................................1.003
Coefficient of Expansion, 10-6 in/in•°F(μm/m•°C)
70-200°F (21-93°C).................... 7.88(14.19)
70-800°F (21-427°C).................8.40 (15.12)
70-1200°F (21-649°C)...............8.85(15.93)
Young's (Tensile)Modulus.................................. 28.3 x 103ksiShearModulus........................................................10.8 x 103 ksi
Poisson'sRatio........................................................................ 0.31
TYPICAL MECHANICAL PROPERTIES

INCOLOY® alloy 890 (UNS N08890) is the latest addition to the INCOLOY alloy family of heat-resistant alloys. Alloy 890 joins existing INCOLOY products in offering high strength along with excellent resistance to oxidation, carburization and sulfidation at temperatures up to 2200°F (1200°C). Alloy 890 offers the high chromium content of alloy 803 along with enhanced properties from additions of molybdenum, silicon and niobium. The primary application for alloy 890 is tubes for ethylene pyrolysis furnaces.

STANDARD PRODUCT FORMS
Smooth bore tubes; Internally finned tubes

MAJOR SPECIFICATIONS
UNS N08890
ASTM B407, 408, 409

LIMITING CHEMICAL COMPOSITION, %
Ni....... 40.0 - 45.0
Cr......23.5 – 28.5
Fe............ Balance
Mo.......... 1.0 - 2.0
Si............ 1.0 - 2.0
Nb.......... 0.2 - 1.0
Ta......0.10 – 0.60
Ti....... 0.15 - 0.60
Al.......0.05 – 0.60
C........0.06 – 0.14
Mn.......... 1.5 max.
Cu........0.75 max.
P...........0.03 max.
S........ 0.015 max.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,Ib/in3.........................................................................0.287
g/cm3..........................................................................7.94
Coefficient of Expansion, 10-6 in/in•°F(μm/m•°C)
70-200°F (21- 100°C)................8.02(14.47)
70-600°F (21- 300°C)................8.43(15.11)
70-1000°F (21- 600°C)..............8.94(16.40)
Thermal Conductivity, Btu • in/ft2•h•°F........................... 550
W/m • °C.......................................... 79.3
Electrical Resistivity, ohm •circmil/ft.......................... 212.47
μΩ•cm..............................................1033
Modulus of Elasticity*, 106 psi(GPa).................28.3 (195.1)
Shear Modulus*, 106 psi(GPa)............................. 10.7 (73.8)
Poisson’sRatio*....................................................................0.322
Melting Range, °F (°C)..............2388 – 2522(1309 – 1383)
TYPICAL MECHANICAL PROPERTIES

*The Ultimate Guide to Inconel 718 Rods, UNS N07718 Round Bars and Rods*
Inconel 718 Rods, UNS N07718 Round Bars and Rods are high-performance materials known for their exceptional strength, corrosion resistance, and durability at high temperatures. These nickel-chromium alloys are widely used in various industries, including aerospace, oil and gas, and chemical processing. At Prashaant Steel And Alloys, we specialize in providing high-quality Inconel 718 Rods, UNS N07718 Round Bars and Rods that meet the rigorous demands of these industries.
*Properties of Inconel 718 Rods, UNS N07718 Round Bars and Rods*
Inconel 718 Rods, UNS N07718 Round Bars and Rods offer a unique combination of properties, including:
- *High Strength*: These alloys exhibit exceptional strength, making them suitable for applications requiring high performance and efficiency.- *Corrosion Resistance*: Inconel 718 Rods, UNS N07718 Round Bars and Rods offer excellent resistance to corrosion, especially in environments where exposure to moisture and corrosive media is a concern.- *High-Temperature Resistance*: These materials can withstand extremely high temperatures, making them ideal for high-temperature applications.
*Grades and Types of Inconel 718 Rods, UNS N07718 Round Bars and Rods*
Inconel 718 Rods, UNS N07718 Round Bars and Rods are available in various grades and types, including:
- *Inconel 718 (UNS N07718)*: A widely used grade known for its exceptional strength, corrosion resistance, and high-temperature resistance.- *AMS 5662, AMS 5663, AMS 5664*: Specifications for Inconel 718 bars, forgings, and rings.
*Applications of Inconel 718 Rods, UNS N07718 Round Bars and Rods*
Inconel 718 Rods, UNS N07718 Round Bars and Rods are widely used in various industries, including:
- *Aerospace*: Components and equipment that require high strength, corrosion resistance, and high-temperature resistance.- *Oil and Gas*: Equipment and components that demand high resistance to corrosive environments and high strength.- *Chemical Processing*: Components and equipment that require high resistance to corrosive chemicals and environments.
*Why Choose Prashaant Steel And Alloys?*
At Prashaant Steel And Alloys, we pride ourselves on delivering high-quality Inconel 718 Rods, UNS N07718 Round Bars and Rods that meet the stringent requirements of various industries. Our products are manufactured with precision and undergo rigorous testing to ensure they meet the highest standards.
In conclusion, Inconel 718 Rods, UNS N07718 Round Bars and Rods are high-performance materials that offer a unique combination of strength, corrosion resistance, and high-temperature resistance. Their widespread recognition under various designations makes them a popular choice for industries worldwide. For all your Inconel 718 Rod, UNS N07718 Round Bar and Rod needs, trust Prashaant Steel And Alloys to deliver quality and precision.
By understanding the properties, applications, and equivalent grades of Inconel 718 Rods, UNS N07718 Round Bars and Rods, industries can make informed decisions about material selection. Whether you're looking for high strength, corrosion resistance, or high-temperature resistance, these materials are an excellent choice.

ALLOY MP35N ROUND BARS: A Comprehensive Guide to High-Strength and Corrosion-Resistant Alloys
ALLOY MP35N ROUND BARS are high-strength and corrosion-resistant alloys used in various industries, including aerospace, chemical processing, and power generation. These round bars are known for their exceptional resistance to corrosion, high strength, and durability, making them an ideal material for applications where reliability and safety are paramount.
Grades of ALLOY MP35N ROUND BARS
ALLOY MP35N ROUND BARS are available in various grades, each with its unique properties and applications:
- MP35N (UNS R30035): This grade is a popular choice for aerospace and chemical processing applications due to its exceptional resistance to corrosion and high strength.- MP35N (ASTM B 574): This grade conforms to the ASTM B 574 standard, ensuring its quality and reliability for various applications.- MP35N (DIN 2.4956): This grade is equivalent to MP35N and is widely used in European industries.
Standards for ALLOY MP35N ROUND BARS
ALLOY MP35N ROUND BARS conform to various international standards, ensuring their quality and reliability:
- ASTM B 574: This standard covers the requirements for ALLOY MP35N ROUND BARS, including aerospace and chemical processing applications.- DIN EN 10095: This standard covers the requirements for ALLOY MP35N ROUND BARS, including aerospace and chemical processing applications, in Europe.- JIS G 4311: This standard covers the requirements for ALLOY MP35N ROUND BARS, including aerospace and chemical processing applications, in Japan.
Equivalent Grades of ALLOY MP35N ROUND BARS
ALLOY MP35N ROUND BARS have equivalent grades in other countries, making it easier to source them globally:
- MP35N (Germany): This grade is equivalent to MP35N and is widely used in Germany's aerospace and chemical processing industries.- MP35N (USA): This grade is equivalent to MP35N and is widely used in US industries.- MP35N (Japan): This grade is equivalent to MP35N and is widely used in Japanese industries.
Applications of ALLOY MP35N ROUND BARS
ALLOY MP35N ROUND BARS are used in various industries due to their exceptional resistance to corrosion, high strength, and durability:
- Aerospace: ALLOY MP35N ROUND BARS are used in aerospace applications due to their exceptional resistance to corrosion and high strength.- Chemical Processing: ALLOY MP35N ROUND BARS are used in chemical processing applications due to their exceptional resistance to corrosion and high temperatures.- Power Generation: ALLOY MP35N ROUND BARS are used in power generation applications due to their exceptional resistance to corrosion and high temperatures.
Conclusion
ALLOY MP35N ROUND BARS are a reliable and high-strength alloy for aerospace, chemical processing, and power generation applications. With their exceptional resistance to corrosion, high strength, and durability, they are an ideal choice for industries where reliability and safety are paramount. Whether you're in the aerospace, chemical processing, or power generation industry, ALLOY MP35N ROUND BARS are the perfect solution for your application.

Nickel-iron-chromium alloys that have the same basic composition as INCOLOY alloy 800 but with significantly higher creep-rupture strength. The higher strength results from close control of the carbon, aluminum and titanium contents in conjunction with a hightemperature anneal. Used in chemical and petrochemical processing, power plants for super-heater and reheater tubing, industrial furnaces and heat-treating equipment.

STANDARD PRODUCT FORMS
Pipe, tube, sheet, strip, plate, round bar, flat bar, forgingstock, hexagon and wire.

MAJOR SPECIFICATIONS
UNS N08810, N08811
BS 3072, 3073, 3074, 3075,
3076 (NA15)
ASTM A 240, A 480, B 163,
B 366, B 407 – 409,
B 514, B 515, B 564,
B 751, B 775, B 829
ASME SA-240, SA-480,
SB-163, SB-366,
SB-407 – SB-409, SB-514,
SB-515, SB-564, SB-751,
SB-775, SB-829
ASME Code Cases 1325,
1949, 1983, 2339,
N-201, N-254
DIN 17459, 17460
Werkstoff Nr. 1.4876, 1.4958,
1.4959
VdTÜV 412, 434
EN 10028-7, 10095
ISO 4955A, 6207, 6208,
9723, 9725
LIMITING CHEMICAL COMPOSITION, %800H
Ni........30.0–35.0
Fe.........39.5 min.
Cr.......19.0–23.0
C.........0.05–0.10
Al........0.15–0.60
Ti............0.15–0.60
Al+Ti......0.30–1.20
800HT
Ni........30.0–35.0
Fe.........39.5 min.
Cr.......19.0–23.0
C.........0.06–0.10
Al........0.25–0.60
Ti............0.25–0.60
Al+Ti......0.85–1.20
* By special agreement, this product can besupplied with
aluminum + titanium limited to 0.4 – 0.7%.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density, Ib/in3(g/cm3)............................................0.287 (7.94)
Melting Range, °F (°C)..............2475 – 2525(1357 – 1385)
Specific Heat, Btu/lb•°F(J/kg•°C)......................... 0.11 (460)
Curie Temperature, °F(°C)....................................-175 (-115)
Permeability at 200 Oersted (15.9kA/m).....................1.014
Coefficient of Expansion, 10-6 in/in•°F(μm/m•°C)
70-200°F (20-100°C)...................... 7.9(14.4)
Thermal ConductivityA, Btu•in/ft2•h•°F(W/m•°C)........80 (11.5)
Electrical ResistivityA, ohm•circ mil/ft(μΩ•m)....... 595 (0.989)
TYPICAL MECHANICAL PROPERTIES

Designed for use in petrochemical, chemical and thermal processing applications, the alloy provides an exceptional level of high-temperature corrosion-resistance in oxidation, sulfidation, carburization and nitridation environments. In addition to thermal stability characteristics required to prevent thermal distortion and embrittlement, it exhibits excellent stress-rupture strengths. These characteristics, along with a high resistance to carburization and cyclic oxidation, make this alloy the material of choice for many severe applications including ID-finned pyrolysis tubing in high-severity ethylene furnaces.

STANDARD PRODUCT FORMS
Pipe, tube, sheet, strip, plate, round bar, flat bar, forgingstock, ID finned tube and wire.

MAJOR SPECIFICATIONS
UNS S35045
ASTM A 182, A 213, A 240, A 249, A 480
ASME Code Case 2304
ASME SA 182, SA 213, SA 240, SA 249, SA480

LIMITING CHEMICAL COMPOSITION, %
Ni....... 32.0 – 37.0
Fe.......Remainder
Cr......25.0 – 29.0
C........0.06 – 0.10
Mn........1.50 max.
S........ 0.015 max.
Si............ 1.0 max.
Cu........0.75 max.
Al.......0.15 – 0.60
Ti.......0.15 – 0.60

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density, Ib/in3(g/cm3)............................................0.284 (7.86)
Melting Range, °F (°C)..............2490 – 2555(1365 – 1400)
Specific Heat, Btu/lb•°F(J/kg•°C).......................0.114 (479)
Permeability at 200 Oersted (15.9kA/m).....................1.001
Coefficient of Expansion, 10-6 in/in•°F(μm/m•°C)
70-200°F (21-93°C)...................... 8.31(15.0)
70-800°F (21-427°C)................... 9.14(16.5)
70-1200°F (21-649°C)..................9.48(17.1)
Thermal ConductivityA, Btu•in/ft2•h•°F(W/m•°C)........78 (11.3)
Electrical ResistivityA, ohm•circ mil/ft(μΩ•m)..........618 (1.03)
Young’s ModulusA, 106 psi(GPa)............................ 28.3 (195)
Shear’s ModulusA, 106 psi(GPa)............................ 10.7 (73.8)
Poisson’sRatioA.......................................................................0.32
ARoom temperature, as solution annealed.
TYPICAL MECHANICAL PROPERTIES

A new high-performance and cost-effective alloy specifically developed for automotive exhaust system flexible couplings. Potentially useful for exhaust gas recirculation tubes and other fabricated exhaust system components.

STANDARD PRODUCT FORMS
Sheet and strip.

MAJOR SPECIFICATIONS
UNS S35135
ASTM A 240, A 480

LIMITING CHEMICAL COMPOSITION, %
Ni.......30.0 – 38.0
Fe.......Remainder
Cr......20.0 – 25.0
Mo..........4.0 – 4.8
C...........0.08 max.
Si............0.6 – 1.0
Mn.................. 0.01
S........ 0.015 max.
Ti............0.4 – 1.0

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,Ib/in3.........................................................................0.290
g/cm3.........................................................................8.02
Melting Range,°F...................................................2467 –2539
°C...................................................1353– 1393
Permeability at 200 Oersted (15.9kA/m).....................1.004
Coefficient of Expansion, 10-6 in/in•°F(μm/m•°C)
70-200°F (21-93°C)...................... 8.15(14.7)
70-800°F (21-427°C)................... 8.90(15.9)
70-1200°F (21-649°C)................. 9.21(16.4)
Thermal ConductivityA, Btu •in/ft2•h•°F......................... 78.1
W/m •°C......................................... 11.3
Electrical ResistivityA, ohm •circmil/ft.............................. 628
μΩ•m............................................... 1.04
Young's ModulusA, 106psi.................................................... 28.3
GPa...........................................................195
ARoom temperature, as annealed.
TYPICAL MECHANICAL PROPERTIES

INCOLOY alloy 865 (UNS S35115) is an economical, high-performance corrosionresistant alloy. Developed from the technology of INCOLOY alloy 864, it improved strength, ductility and fatigue resistance at reduced cost. The alloy was designed for automotive applications such as flexible couplings and exhaust gas recirculation (EGR) components. However, with its excellent combination of strength and corrosion resistance, alloy 865 may be evaluated for chemical processing and marine applications.

STANDARD PRODUCT FORMS
Sheet and strip.

MAJOR SPECIFICATIONS
UNS S35115
ASTM A240/A480

LIMITING CHEMICAL COMPOSITION, %
Ni.......10.0 – 22.0
Cr.......23.0 – 25.0
Mo.....1.50 – 2.50
N........0.20 – 0.30
Mn.......... 1.0 max.
C........ 0.020 max.
P......... 0.045 max.
S........ 0.015 max.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,Ib/in3.........................................................................0.276
g/cm3..........................................................................7.64
Melting Range,°F...................................................2484 –2535
°C...................................................1362– 1390
Permeability at 200 Oersted (15.9kA/m).......................1.002
Electrical Resistivity, ohm •circmil/ft................................ 553
μΩ•m.....................................................92
Young's (Tensile) Modulus,ksi................................. 28.7 x 103
GPa........................................... 195
TYPICAL MECHANICAL PROPERTIES

A nickel-iron-cobalt alloy with additions of niobium, titanium and aluminum for precipitation hardening. The alloy combines high strength with a low and constant coefficient of thermal expansion at temperatures to about 800°F (430°C). It also has a constant modulus of elasticity and is highly resistant to thermal fatigue and thermal shock. Used in gas turbines for rings and casings.

STANDARD PRODUCT FORMS
Sheet, plate, rod, bar and forging stock.

MAJOR SPECIFICATIONS
UNS N19903

LIMITING CHEMICAL COMPOSITION, %
Ni.......36.0 – 40.0
Fe.......Remainder
Co...... 13.0 – 17.0
Al.......0.30 – 1.15
Ti.......1.00 – 1.85
Nb.....2.40 – 3.50

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,
Ib/in3.........................................................................0.298
g/cm3.........................................................................
8.25
Melting Range,
°F....................................................2405
– 2539
°C....................................................1318 – 1393
Specific Heat,
Btu/lb•°F.....................................................0.105
J/kg•°C............................................................
442
Curie Temperature,
°F................................................780 –
880
°C................................................415 –
470
Coefficient of Expansion, 77 – 800°F, 10-6
in/in •°F........4.0
25 – 427°C, μm/m •°C............. 7.2
Thermal Conductivity, Btu •
in/ft2•h•°F............................ 116
W/m •°C........................................... 16.7
Electrical Resistivity, ohm •circ
mil/ft................................ 379
μΩ•m...............................................0.650
TYPICAL MECHANICAL PROPERTIES

A nickel-iron-cobalt alloy with additions of niobium and titanium for precipitation hardening. It has the low coefficient of expansion and high strength of INCOLOY alloy 903 but with improved notch-rupture properties at elevated temperatures. Used for components of gas turbines including seals, shafts and casings.

STANDARD PRODUCT FORMS
Round bar and forging stock.

MAJOR SPECIFICATIONS
UNS N19907

LIMITING CHEMICAL COMPOSITION, %
Ni.......35.0 – 40.0
Fe.......Remainder
Cu.....12.0 – 16.0
Nb..........4.3 – 5.2
Ti............1.3 – 1.8
Al............ 0.2 max.
Si.......0.07 – 0.35

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,Ib/in3.........................................................................0.301
g/cm3.........................................................................8.33
Melting Range,°F....................................................2440– 2550
°C....................................................1335– 1400
Specific Heat,Btu/lb•°F.....................................................0.103
J/kg•°C............................................................431
Curie Temperature,°F................................................750 –850
°C................................................400 –455
Coefficient of Expansion, 77 – 800°F, 10-6in/in •°F........4.3
25 – 427°C, μm/m •°C............. 7.7
Thermal Conductivity, Btu •in/ft2•h•°F............................ 103
W/m • °C.......................................... 14.8
Electrical Resistivity, ohm •circmil/ft................................ 419
μΩ•m...............................................0.697
TYPICAL MECHANICAL PROPERTIES

A nickel-iron-cobalt alloy with a silicon addition containing niobium and titanium for precipitation hardening. It is similar to INCOLOY alloys 903 and 907 because it has low thermal expansion and high strength. However, the silicon addition results in improved notch-rupture and tensile properties achieved with less-restrictive processing and significantly shorter heat treatments. Used for gas-turbine casings, shrouds, vanes and shafts.

STANDARD PRODUCT FORMS
Round bar, forging stock and hot-rolled profile.

MAJOR SPECIFICATIONS
UNS N19909
SAE AMS 5884, 5892, 5893

LIMITING CHEMICAL COMPOSITION, %
Ni.......35.0 – 40.0
Fe.......Remainder
Co......12.0 – 16.0
Nb..........4.3 – 5.2
Ti............1.3 – 1.8
Si.......0.25 – 0.50
Al..........0.15 max.
C...........0.06 max.

PHYSICAL CONSTANTS AND THERMAL
PROPERTIES
Density,
Ib/in3.........................................................................0.296
g/cm3.........................................................................
8.19
Melting Range,
°F...................................................2540 –
2610
°C...................................................1395
– 1430
Specific Heat,
Btu/lb•°F.....................................................0.102
J/kg•°C............................................................
427
Curie Temperature,
°F................................................750 –
850

°C................................................400 –
455
Coefficient of Expansion, 77 – 800°F, 10-6
in/in •°F........4.3
25 – 427°C, μm/m •°C............. 7.7
Thermal Conductivity, Btu •
in/ft2•h•°F............................ 103
W/m •°C........................................... 14.8
Electrical Resistivity, ohm •circ
mil/ft................................ 438
μΩ•m...............................................0.728
TYPICAL MECHANICAL PROPERTIES

INCOLOY alloy 945 (UNS N09945) is a corrosionresistant, high strength, age hardenable nickeliron- chromium alloy. Its nickel content provides resistance to stress corrosion cracking. Its combination of nickel, molybdenum and copper gives it outstanding resistance to attack by reducing media, while its high chromium content provides resistance to oxidizing environments. Molybdenum and niobium provide resistance to localized attack such as pitting and crevice corrosion. Niobium, titanium and aluminum react upon heat treatment to precipitate gamma prime and gamma double prime phases that give the alloy its high strength. With this highly desirable combination of properties, alloy 945 is suitable for many demanding applications in oil and gas service. With resistance to sulfide-induced stress corrosion cracking and corrosion in hydrogen sulfide, alloy 945 is ideal for fabrication of down-hole and surface well equipment including tubular products, valves, hangers, landing nipples, tool joints and packers. When cold worked and aged, the alloy provides the properties required for fasteners, pump shafting and high strength piping.

STANDARD PRODUCT FORMS
Bar, forging stock, tubes.

MAJOR SPECIFICATIONS
UNS N09945
NACE MR0175 (Approved to Level VII andLevel VI at 450°F)

LIMITING CHEMICAL COMPOSITION, %
Ni.......45.0 – 55.0
Cr......19.5 – 23.0
Fe............ Balance
Mo..........3.0 – 4.0
Cu..........1.5 – 3.0
Nb..........2.5 – 4.5
Ti............0.5 – 2.5
Al......... 0.01 – 0.7
C..... 0.005 – 0.04
Mn.......... 1.0 max.
Si............ 0.5 max.
P...........0.03 max.
S........ 0.030 max.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,Ib/in3.........................................................................0.281
g/cm3.......................................................................7.777
Melting Range,°F...................................................2317 –2510
°C...................................................1270 – 1377
Permeability at 200Oersted.............................................1.003
Coefficient of Expansion, 10-6 in/in•°F(μm/m•°C)
70-200°F (21-93°C).................... 7.88(14.19)
70-800°F (21-427°C).................8.40 (15.12)
70-1200°F (21-649°C)...............8.85(15.93)
Young's (Tensile)Modulus.................................. 28.3 x 103ksiShearModulus........................................................10.8 x 103 ksi
Poisson'sRatio........................................................................ 0.31
TYPICAL MECHANICAL PROPERTIES

A nickel-iron-chromium alloy with additions of copper and molybdenum. It also contains niobium for stabilization against sensitization and resultant intergranular corrosion. The alloy has excellent resistance to general corrosion, pitting and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric and nitric acids. Used for tanks, piping, heat exchangers, pumps, valves and other process equipment.

STANDARD PRODUCT FORMS
Pipe, tube, sheet, strip, plate, round bar, flat bar, forgingstock, hexagon and wire.

MAJOR SPECIFICATIONS
UNS N08020
ASTM A 240, A 480, B 366,
B 462 – 464, B 468,
B 471 – B 475, B 729, B 751,
B 775, B 829, B 906
DIN 17744, 17750-17754
ASME SA-240, SA-480, SB-366,
SB-462 – SB-464,
SB-468, SB-471 – SB-475,
SB-729, SB-751, SB-775,
SB-829, SB-906
ISO 6207, 6208, 9723 – 9725

LIMITING CHEMICAL COMPOSITION, %
Ni ......32.0 – 38.0
Fe.......Remainder
Cr......19.0 – 21.0
Cu..........3.0 – 4.0
Nb+Ta.... 8xC-1.0
Mo..........2.0 – 3.0
Nb.......... 1.0 max.
C...........0.07 max.
Mn.......... 2.0 max.
P......... 0.045 max.
S........ 0.035 max.
Si............ 1.0 max.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,Ib/in3.........................................................................0.292
g/cm3.........................................................................8.08
Specific Heat,Btu/lb•°F.......................................................0.12
J/kg•°C............................................................500
Coefficient of Expansion, 77 – 212°F, 10-6in/in •°F........8.2
25 – 100°C, μm/m •°C.......... 14.7
Thermal Conductivity, Btu •in/ft2•h•°F...............................85
W/m •°C........................................... 12.3
Electrical Resistivity, ohm •circmil/ft................................ 651
μΩ•m.................................................1.08
TYPICAL MECHANICAL PROPERTIES

INCOLOY 28 (UNS N08028) is a highly corrosion-resistant austenitic alloy offering resistance to a variety of media. The alloy resists attack in reducing media due to its contents of nickel, copper and molybdenum and is resistant to oxidizing species due to its high level of chromium. Alloy 28 offers resistance to general, localized and stress-induced corrosion by chlorides and hydrogen sulfides. Thus, it is widely used in oilfield applications. Tubes are cold worked to high levels of strength for downhole service in deep sour gas wells. With its excellent combination of strength and corrosion resistance, alloy 28 also finds applications in the process industries. It is especially useful for handling phosphoric acid. Due to its resistance to chlorides, alloy 28 tubes may be used in the marine industry for seawater-cooled heat exchangers.

STANDARD PRODUCT FORMS
Tube.

MAJOR SPECIFICATIONS
UNS N08028
ASTM B 668, B 709, B 829
ASME SB-668, SB-709, SB-829
Werkstoff Nr. 1.4563
NACE MR-01-75

LIMITING CHEMICAL COMPOSITION, %
Ni ......30.0 – 34.0
Cr.......26.0 – 28.0
Mo..........3.0 – 4.0
Cu..........0.6 – 1.4
Fe............ Balance
Mn........2.50 max.
C........ 0.030 max.
P......... 0.030 max.
S........ 0.030 max.
Si..........1.00 max.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density, Ib/in3(g/cm3).................................................0.29(8.0)
Specific Heat, Btu/lb•°F(J/kg•°C)......................0.105 (450)
Coefficient of Expansion, 10-6 in/in•°F(μm/m•°C)
75-200°F (21-93°C).........................8.3(15.0)
75-500°F (21-260°C)......................8.8(15.9)
75-800°F (21-427°C)......................9.3(16.8)
Thermal ConductivityA, Btu •in/ft2•h•°F.............................66
W/m •°C......................................... 11.4
Electrical ResistivityA, ohm •circ mil/ft(μΩ•m)..... 594 (0.99)
Young's ModulusA, 106 psi(GPa)............................ 29.0 (200)
ARoom temperature, as annealed.
TYPICAL MECHANICAL PROPERTIES

INCOLOY 28 (UNS N08028) is a highly corrosion-resistant austenitic alloy offering resistance to a variety of media. The alloy resists attack in reducing media due to its contents of nickel, copper and molybdenum and is resistant to oxidizing species due to its high level of chromium. Alloy 28 offers resistance to general, localized and stress-induced corrosion by chlorides and hydrogen sulfides. Thus, it is widely used in oilfield applications. Tubes are cold worked to high levels of strength for downhole service in deep sour gas wells. With its excellent combination of strength and corrosion resistance, alloy 28 also finds applications in the process industries. It is especially useful for handling phosphoric acid. Due to its resistance to chlorides, alloy 28 tubes may be used in the marine industry for seawater-cooled heat exchangers.

STANDARD PRODUCT FORMS
Tube.

MAJOR SPECIFICATIONS
UNS N08028
ASTM B 668, B 709, B 829
ASME SB-668, SB-709, SB-829
Werkstoff Nr. 1.4563
NACE MR-01-75

LIMITING CHEMICAL COMPOSITION, %
Ni ......30.0 – 34.0
Cr.......26.0 – 28.0
Mo..........3.0 – 4.0
Cu..........0.6 – 1.4
Fe............ Balance
Mn........2.50 max.
C........ 0.030 max.
P......... 0.030 max.
S........ 0.030 max.
Si..........1.00 max.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density, Ib/in3
(g/cm3).................................................0.29
(8.0)
Specific Heat, Btu/lb•°F
(J/kg•°C)......................0.105 (450)
Coefficient of Expansion, 10-6 in/in•°F
(μm/m•°C)
75-200°F (21-93°C).........................8.3
(15.0)
75-500°F (21-260°C)......................8.8
(15.9)
75-800°F (21-427°C)......................9.3
(16.8)
Thermal ConductivityA, Btu •
in/ft2•h•°F.............................66
W/m •°C......................................... 11.4
Electrical ResistivityA, ohm •circ mil/ft
(μΩ•m)..... 594 (0.99)
Young's ModulusA, 106 psi
(GPa)............................ 29.0 (200)
ARoom temperature, as annealed.
TYPICAL MECHANICAL PROPERTIES

A nickel-iron-chromium alloy with an addition of silicon for enhanced oxidation resistance. It has good strength at high temperatures and excellent resistance to carburizing and oxidizing atmospheres. The alloy's austenitic microstructure remains stable during long-time exposure to high temperature. Used in industrial heating for furnace muffles, retorts, conveyor systems and heat-treating baskets and fixtures.

STANDARD PRODUCT FORMS
Tube, sheet, strip, plate, round bar, forging stock,
hexagon, wire, and wire rod.

MAJOR SPECIFICATIONS
UNS N08330
ASTM B 366, B 511, B 512,
B 535, B 536, B 546, B 710,
B 739, B 829
SAE AMS 5592, 5716
ASME SB-366, SB-511, SB-512,
SB-535, SB-536, SB-546,
SB-710, SB-739, SB-829
Werkstoff Nr. 1.4886

LIMITING CHEMICAL COMPOSITION, %
Ni....... 34.0 – 37.0
Fe.......Remainder
Cr....... 17.0 – 20.0
Si.......0.75 – 1.50
C...........0.08 max.
Mn.......... 2.0 max.
P............0.30 max.
Si..........0.30 max.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,Ib/in3.........................................................................0.292
g/cm3.........................................................................8.08
Melting Range,°F....................................................2520– 2590
°C....................................................1380– 1420
Specific Heat,Btu/lb•°F.......................................................0.11
J/kg•°C............................................................460
Permeability at 200 Oersted (15.9kA/m)....................... 1.02
Coefficient of Expansion, 10-6 in/in•°F(μm/m•°C)
75-200°F (24-93°C).........................8.3(14.9)
Thermal Conductivity, Btu •in/ft2•h•°F...............................86
W/m •°C........................................... 12.4
Electrical Resistivity, ohm •circmil/ft................................ 612
μΩ•m...............................................1.017
TYPICAL MECHANICAL PROPERTIES

A nickel-iron-chromium alloy with an addition of silicon for enhanced oxidation resistance. It has good strength at high temperatures and excellent resistance to carburizing and oxidizing atmospheres. The alloy's austenitic microstructure remains stable during long-time exposure to high temperature. Used in industrial heating for furnace muffles, retorts, conveyor systems and heat-treating baskets and fixtures.

STANDARD PRODUCT FORMS
Tube, sheet, strip, plate, round bar, forging stock,
hexagon, wire, and wire rod.

MAJOR SPECIFICATIONS
UNS N08330
ASTM B 366, B 511, B 512,
B 535, B 536, B 546, B 710,
B 739, B 829
SAE AMS 5592, 5716
ASME SB-366, SB-511, SB-512,
SB-535, SB-536, SB-546,
SB-710, SB-739, SB-829
Werkstoff Nr. 1.4886

LIMITING CHEMICAL COMPOSITION, %
Ni....... 34.0 – 37.0
Fe.......Remainder
Cr....... 17.0 – 20.0
Si.......0.75 – 1.50
C...........0.08 max.
Mn.......... 2.0 max.
P............0.30 max.
Si..........0.30 max.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,Ib/in3.........................................................................0.292
g/cm3.........................................................................8.08
Melting Range,°F....................................................2520– 2590
°C....................................................1380– 1420
Specific Heat,Btu/lb•°F.......................................................0.11
J/kg•°C............................................................460
Permeability at 200 Oersted (15.9kA/m)....................... 1.02
Coefficient of Expansion, 10-6 in/in•°F(μm/m•°C)
75-200°F (24-93°C).........................8.3(14.9)
Thermal Conductivity, Btu •in/ft2•h•°F...............................86
W/m •°C........................................... 12.4
Electrical Resistivity, ohm •circmil/ft................................ 612
μΩ•m...............................................1.017
TYPICAL MECHANICAL PROPERTIES

A nickel-iron-cobalt alloy with a silicon addition containing niobium and titanium for precipitation hardening. It is similar to INCOLOY alloys 903 and 907 because it has low thermal expansion and high strength. However, the silicon addition results in improved notch-rupture and tensile properties achieved with less-restrictive processing and significantly shorter heat treatments. Used for gas-turbine casings, shrouds, vanes and shafts.

STANDARD PRODUCT FORMS
Round bar, forging stock and hot-rolled profile.

MAJOR SPECIFICATIONS
UNS N19909
SAE AMS 5884, 5892, 5893

LIMITING CHEMICAL COMPOSITION, %
Ni.......35.0 – 40.0
Fe.......Remainder
Co......12.0 – 16.0
Nb..........4.3 – 5.2
Ti............1.3 – 1.8
Si.......0.25 – 0.50
Al..........0.15 max.
C...........0.06 max.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,Ib/in3.........................................................................0.296
g/cm3.........................................................................8.19
Melting Range,°F...................................................2540 –2610
°C...................................................1395– 1430
Specific Heat,Btu/lb•°F.....................................................0.102
J/kg•°C............................................................427
Curie Temperature,°F................................................750 –850
°C................................................400 –455
Coefficient of Expansion, 77 – 800°F, 10-6in/in •°F........4.3
25 – 427°C, μm/m •°C............. 7.7
Thermal Conductivity, Btu •in/ft2•h•°F............................ 103
W/m •°C........................................... 14.8
Electrical Resistivity, ohm •circmil/ft................................ 438
μΩ•m...............................................0.728
TYPICAL MECHANICAL PROPERTIES

INCOLOY® alloy 890 (UNS N08890) is the latest addition to the INCOLOY alloy family of heat-resistant alloys. Alloy 890 joins existing INCOLOY products in offering high strength along with excellent resistance to oxidation, carburization and sulfidation at temperatures up to 2200°F (1200°C). Alloy 890 offers the high chromium content of alloy 803 along with enhanced properties from additions of molybdenum, silicon and niobium. The primary application for alloy 890 is tubes for ethylene pyrolysis furnaces.

STANDARD PRODUCT FORMS
Smooth bore tubes; Internally finned tubes

MAJOR SPECIFICATIONS
UNS N08890
ASTM B407, 408, 409

LIMITING CHEMICAL COMPOSITION, %
Ni....... 40.0 - 45.0
Cr......23.5 – 28.5
Fe............ Balance
Mo.......... 1.0 - 2.0
Si............ 1.0 - 2.0
Nb.......... 0.2 - 1.0
Ta......0.10 – 0.60
Ti....... 0.15 - 0.60
Al.......0.05 – 0.60
C........0.06 – 0.14
Mn.......... 1.5 max.
Cu........0.75 max.
P...........0.03 max.
S........ 0.015 max.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density,Ib/in3.........................................................................0.287
g/cm3..........................................................................7.94
Coefficient of Expansion, 10-6 in/in•°F(μm/m•°C)
70-200°F (21- 100°C)................8.02(14.47)
70-600°F (21- 300°C)................8.43(15.11)
70-1000°F (21- 600°C)..............8.94(16.40)
Thermal Conductivity, Btu • in/ft2•h•°F........................... 550
W/m • °C.......................................... 79.3
Electrical Resistivity, ohm •circmil/ft.......................... 212.47
μΩ•cm..............................................1033
Modulus of Elasticity*, 106 psi(GPa).................28.3 (195.1)
Shear Modulus*, 106 psi(GPa)............................. 10.7 (73.8)
Poisson’sRatio*....................................................................0.322
Melting Range, °F (°C)..............2388 – 2522(1309 – 1383)
TYPICAL MECHANICAL PROPERTIES

A nickel-iron controlled-expansion alloy containing 48% nickel. Its coefficient of thermal expansion is designed to match that of soft lead and soda-lime glasses. The alloy also has a high inflection point. Used for glass-to-metal seals in radio valves and incandescent electric light bulbs and for industrial thermostats that operate at temperatures up to 840°F (450°C).

STANDARD PRODUCT FORMS
Wire.

MAJOR SPECIFICATIONS
UNS K94800, ASTM F 30, DIN 17745, Werkstoff Nr. 1.3922, Werkstoff Nr. 1.3922, 

LIMITING CHEMICAL COMPOSITION, %
Ni .....................48 a
Fe ......Remainder
C ..........0.05 max.
Mn .......0.80 max.
P ........0.025 max.
S .......0.025 max.
Si .........0.30 max.
Cr .........0.25 max.
Al .........0.10 max.
Co ..........1.0 max.
aNominal value; adjusted to meet expansionrequirements.

PHYSICAL CONSTANTS AND THERMALPROPERTIES
Density, Ib/in3........................................................................0.296
g/cm3.........................................................................8.20
Melting Temperature (Approximate), °F........................2640
°C ........................1450
Inflection Point, °F..................................................................860
°C..................................................................460
Thermal Conductivity, Btu • in/ft2 • h • °F...........................116
W/m • °C ..........................................16.7
Coefficient of Expansion, 68 – 212°F, 10-6in/in • °F........4.7
20 – 100°C, µm/m • °C ............8.5
68 – 752°F, 10-6 in/in • °F ..............4.6 –5.2
20 – 400°C, µm/m • °C ...................8.3 –9.3
Electrical Resistivity, ohm • circ mil/ft...............................280
µ Ω• m..............................................0.470
TYPICAL MECHANICAL PROPERTIES
(Annealed)
Tensile Strength, ksi..................................................................75
MPa............................................................520
Yield Strength (0.2% Offset), ksi...........................................38
MPa .....................................260
Elongation, %..............................................................................43

ALLOY 59 ROUND BARS UNS N06059: A Comprehensive Guide to Corrosion-Resistant Alloys
ALLOY 59 ROUND BARS UNS N06059 are corrosion-resistant alloys used in various industries, including chemical processing, aerospace, and power generation. These round bars are known for their exceptional resistance to corrosion, high strength, and durability, making them an ideal material for applications where reliability and safety are paramount.
Grades of ALLOY 59 ROUND BARS UNS N06059
ALLOY 59 ROUND BARS UNS N06059 are available in various grades, each with its unique properties and applications:
- ALLOY 59 (UNS N06059): This grade is a popular choice for chemical processing and aerospace applications due to its exceptional resistance to corrosion and high strength.- ALLOY 59 (ASTM B 637): This grade conforms to the ASTM B 637 standard, ensuring its quality and reliability for various applications.- ALLOY 59 (DIN 2.4858): This grade is equivalent to ALLOY 59 and is widely used in European industries.
Standards for ALLOY 59 ROUND BARS UNS N06059
ALLOY 59 ROUND BARS UNS N06059 conform to various international standards, ensuring their quality and reliability:
- ASTM B 637: This standard covers the requirements for ALLOY 59 ROUND BARS UNS N06059, including chemical processing and aerospace applications.- DIN EN 10095: This standard covers the requirements for ALLOY 59 ROUND BARS UNS N06059, including chemical processing and aerospace applications, in Europe.- JIS G 4311: This standard covers the requirements for ALLOY 59 ROUND BARS UNS N06059, including chemical processing and aerospace applications, in Japan.
Equivalent Grades of ALLOY 59 ROUND BARS UNS N06059
ALLOY 59 ROUND BARS UNS N06059 have equivalent grades in other countries, making it easier to source them globally:
- ALLOY 59 (Germany): This grade is equivalent to ALLOY 59 and is widely used in Germany's chemical processing and aerospace industries.- ALLOY 59 (USA): This grade is equivalent to ALLOY 59 and is widely used in US industries.- ALLOY 59 (Japan): This grade is equivalent to ALLOY 59 and is widely used in Japanese industries.
Applications of ALLOY 59 ROUND BARS UNS N06059
ALLOY 59 ROUND BARS UNS N06059 are used in various industries due to their exceptional resistance to corrosion, high strength, and durability:
- Chemical Processing: ALLOY 59 ROUND BARS UNS N06059 are used in chemical processing applications due to their exceptional resistance to corrosion and high strength.- Aerospace: ALLOY 59 ROUND BARS UNS N06059 are used in aerospace applications due to their exceptional resistance to corrosion and high strength.- Power Generation: ALLOY 59 ROUND BARS UNS N06059 are used in power generation applications due to their exceptional resistance to corrosion and high strength.
Conclusion
ALLOY 59 ROUND BARS UNS N06059 are a reliable and corrosion-resistant alloy for chemical processing, aerospace, and power generation applications. With their exceptional resistance to corrosion, high strength, and durability, they are an ideal choice for industries where reliability and safety are paramount. Whether you're in the chemical processing, aerospace, or power generation industry, ALLOY 59 ROUND BARS UNS N06059 are the perfect solution for your application.

*The Ultimate Guide to Stainless Steel Round Bars and Rods*
Stainless Steel Round Bars and Rods are versatile materials known for their exceptional strength, corrosion resistance, and durability. These alloys are widely used in various industries, including construction, automotive, aerospace, and medical applications. At Prashaant Steel And Alloys, we specialize in providing high-quality Stainless Steel Round Bars and Rods that meet the rigorous demands of these industries.
*Properties of Stainless Steel Round Bars and Rods*
Stainless Steel Round Bars and Rods offer a unique combination of properties, including:
- *Corrosion Resistance*: These alloys exhibit excellent resistance to corrosion, especially in environments where exposure to moisture and corrosive media is a concern.- *High Strength*: They offer high tensile strength and yield strength, making them suitable for applications requiring robust materials.- *Machinability*: Stainless Steel Round Bars and Rods are known for their excellent machinability, allowing for precise and efficient manufacturing of complex components.
*Grades and Types of Stainless Steel Round Bars and Rods*
Stainless Steel Round Bars and Rods are available in various grades and types, including:
- *304*: A widely used grade known for its excellent corrosion resistance and formability.- *316*: A grade that offers superior corrosion resistance, especially in chloride-rich environments.- *410*: A martensitic grade known for its high strength and hardness.- *17-4 PH*: A precipitation-hardened grade that offers high strength and corrosion resistance.
*Equivalent Grades and Names*
The Stainless Steel Round Bars and Rods are recognized under various equivalent grades and names worldwide. Some of these include:
- *AISI 304*: This American Iron and Steel Institute designation is widely recognized for its corrosion resistance and formability.- EN 1.4301: This European designation is equivalent to 304 grade.- *UNS S30400*: This UNS designation is recognized globally for 304 grade.
*Applications of Stainless Steel Round Bars and Rods*
Stainless Steel Round Bars and Rods are widely used in various industries, including:
- *Construction*: Structural components, handrails, and architectural features.- *Automotive*: Components and parts that require high strength and resistance to corrosion.- *Aerospace*: Components requiring high strength and resistance to corrosion at high temperatures.- *Medical*: Surgical instruments and implants that require high strength and good corrosion resistance.
*Why Choose Prashaant Steel And Alloys?*
At Prashaant Steel And Alloys, we pride ourselves on delivering high-quality Stainless Steel Round Bars and Rods that meet the stringent requirements of various industries. Our products are manufactured with precision and undergo rigorous testing to ensure they meet the highest standards.
In conclusion, Stainless Steel Round Bars and Rods are versatile materials that offer a unique combination of strength, corrosion resistance, and machinability. Their widespread recognition under various designations makes them a popular choice for industries worldwide. For all your Stainless Steel Round Bars and Rods needs, trust Prashaant Steel And Alloys to deliver quality and precision.
By understanding the properties, applications, and equivalent grades of Stainless Steel Round Bars and Rods, industries can make informed decisions about material selection. Whether you're looking for corrosion resistance, strength, or machinability, these materials are an excellent choice.

*The Ultimate Guide to AMS 5640 Round Bars, AMS 5640 Rods, UNS S30300 Bars and Rods*
AMS 5640 Round Bars, AMS 5640 Rods, UNS S30300 Bars and Rods are high-performance materials known for their exceptional machinability, corrosion resistance, and durability. These austenitic stainless steel alloys are widely used in various industries, including aerospace, defense, and medical equipment. At Prashaant Steel And Alloys, we specialize in providing high-quality AMS 5640 Round Bars, AMS 5640 Rods, UNS S30300 Bars and Rods that meet the rigorous demands of these industries.
*Properties of AMS 5640 Round Bars, AMS 5640 Rods, UNS S30300 Bars and Rods*
AMS 5640 Round Bars, AMS 5640 Rods, UNS S30300 Bars and Rods offer a unique combination of properties, including:
- *Excellent Machinability*: These alloys exhibit exceptional machinability, making them suitable for applications requiring complex geometries and precise tolerances.- *Corrosion Resistance*: AMS 5640 Round Bars, AMS 5640 Rods, UNS S30300 Bars and Rods offer excellent resistance to corrosion, especially in environments where exposure to moisture and corrosive media is a concern.- *Durability*: These materials are known for their exceptional durability and resistance to wear and tear.
*Grades and Types of AMS 5640 Round Bars, AMS 5640 Rods, UNS S30300 Bars and Rods*
AMS 5640 Round Bars, AMS 5640 Rods, UNS S30300 Bars and Rods are available in various grades and types, including:
- *303 Stainless Steel (UNS S30300)*: A widely used grade known for its exceptional machinability and corrosion resistance.- *AMS 5640*: A specification for 303 stainless steel bars and forgings.
*Applications of AMS 5640 Round Bars, AMS 5640 Rods, UNS S30300 Bars and Rods*
AMS 5640 Round Bars, AMS 5640 Rods, UNS S30300 Bars and Rods are widely used in various industries, including:
- *Aerospace*: Components and equipment that require high machinability, corrosion resistance, and durability.- *Medical Equipment*: Components and equipment that demand high corrosion resistance, durability, and precision.- *Industrial Applications*: Components and equipment that require high machinability, corrosion resistance, and durability.
*Why Choose Prashaant Steel And Alloys?*
At Prashaant Steel And Alloys, we pride ourselves on delivering high-quality AMS 5640 Round Bars, AMS 5640 Rods, UNS S30300 Bars and Rods that meet the stringent requirements of various industries. Our products are manufactured with precision and undergo rigorous testing to ensure they meet the highest standards.
In conclusion, AMS 5640 Round Bars, AMS 5640 Rods, UNS S30300 Bars and Rods are high-performance materials that offer a unique combination of machinability, corrosion resistance, and durability. Their widespread recognition under various designations makes them a popular choice for industries worldwide. For all your AMS 5640 Round Bar, AMS 5640 Rod, UNS S30300 Bar and Rod needs, trust Prashaant Steel And Alloys to deliver quality and precision.
By understanding the properties, applications, and equivalent grades of AMS 5640 Round Bars, AMS 5640 Rods, UNS S30300 Bars and Rods, industries can make informed decisions about material selection. Whether you're looking for high machinability, corrosion resistance, or durability, these materials are an excellent choice.

*The Ultimate Guide to ASTM A-453 Round Bars, UNS S66286 Round Rod and Rods*
ASTM A-453 Round Bars, UNS S66286 Round Rod and Rods are high-performance materials known for their exceptional strength, corrosion resistance, and durability. These precipitation-hardening stainless steel alloys are widely used in various industries, including aerospace, defense, and chemical processing. At Prashaant Steel And Alloys, we specialize in providing high-quality ASTM A-453 Round Bars, UNS S66286 Round Rod and Rods that meet the rigorous demands of these industries.
*Properties of ASTM A-453 Round Bars, UNS S66286 Round Rod and Rods*
ASTM A-453 Round Bars, UNS S66286 Round Rod and Rods offer a unique combination of properties, including:
- *High Strength*: These alloys exhibit exceptional strength, making them suitable for applications requiring high performance and efficiency.- *Corrosion Resistance*: ASTM A-453 Round Bars, UNS S66286 Round Rod and Rods offer excellent resistance to corrosion, especially in environments where exposure to moisture and corrosive media is a concern.- *Durability*: These materials are known for their exceptional durability and resistance to wear and tear.
*Grades and Types of ASTM A-453 Round Bars, UNS S66286 Round Rod and Rods*
ASTM A-453 Round Bars, UNS S66286 Round Rod and Rods are available in various grades and types, including:
- *A-286 (UNS S66286)*: A widely used grade known for its exceptional strength, corrosion resistance, and durability.- *ASTM A-453*: A specification for precipitation-hardening stainless steel bars and forgings.
*Applications of ASTM A-453 Round Bars, UNS S66286 Round Rod and Rods*
ASTM A-453 Round Bars, UNS S66286 Round Rod and Rods are widely used in various industries, including:
- *Aerospace*: Components and equipment that require high strength, corrosion resistance, and durability.- *Defense*: Components and equipment that demand high strength, corrosion resistance, and durability.- *Chemical Processing*: Components and equipment that require high resistance to corrosive chemicals and environments.
*Why Choose Prashaant Steel And Alloys?*
At Prashaant Steel And Alloys, we pride ourselves on delivering high-quality ASTM A-453 Round Bars, UNS S66286 Round Rod and Rods that meet the stringent requirements of various industries. Our products are manufactured with precision and undergo rigorous testing to ensure they meet the highest standards.
In conclusion, ASTM A-453 Round Bars, UNS S66286 Round Rod and Rods are high-performance materials that offer a unique combination of strength, corrosion resistance, and durability. Their widespread recognition under various designations makes them a popular choice for industries worldwide. For all your ASTM A-453 Round Bar, UNS S66286 Round Rod and Rod needs, trust Prashaant Steel And Alloys to deliver quality and precision.
By understanding the properties, applications, and equivalent grades of ASTM A-453 Round Bars, UNS S66286 Round Rod and Rods, industries can make informed decisions about material selection. Whether you're looking for high strength, corrosion resistance, or durability, these materials are an excellent choice.

A nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy's matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environmentsand is especially resistant to pitting and crevice corrosion. Used in chemical processing,aerospace and marine engineering, pollutioncontrol equipment and nuclear reactors.

STANDARD PRODUCT FORMSPipe, tube, sheet, strip, plate, round bar, flat bar, forgingstock, hexagon, wire and extruded section.

MAJOR SPECIFICATIONS
UNS N06625
ASTM B 366, B 443, B 444,
B 446, B 564, B 704,
B 705, B 751, B 775, B 829
ASME SB-366, SB-443, SB-444,
SB-446, SB-564, SB-704,
SB-705, SB-751, SB-775,
SB-829
ASME Code Case 1935
SAE AMS 5581, 5599, 5666,
5837, 5869, MAM 5599
BS 3072, 3074, 3076 (NA21)
DIN 17744, 17750 – 17754
Werkstoff Nr. 2.4856
NACE MR-0175/ISO 15156
VdTÜV 499, EN 10095
ISO NW6625, ISO 6207,
6208, 9723 – 9725, 4955A

LIMITING CHEMICAL COMPOSITION, %
Ni...........58.0 min.
Cr.......20.0 – 23.0
Mo....... 8.0 – 10.0
Nba....3.15 – 4.15
aPlus Co.
Fe........... 5.0 max.
C...........0.10 max.
Mn........0.50 max.
Si..........0.50 max.
S........ 0.015 max.
Al..........0.40 max.
Ti..........0.40 max.
P......... 0.015 max.
Cob......... 1.0 max.
bIf determined.

PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density, Ib/in3.........................................................................0.305
g/cm3......................................................................... 8.44
Melting Range, °F....................................................2350 – 2460
°C....................................................1290 – 1350
Specific Heat, Btu/lb•°F.....................................................0.098
J/kg•°C............................................................ 410
Curie Temperature, °F........................................................<-320
°C........................................................<-196
Permeability at 200 Oersted (15.9 kA/m)................... 1.0006
Coefficient of Expansion, 70 – 200°F, 10-6 in/in •°F........ 7.1
21 – 93°C, μm/m • °C............. 12.8
Thermal Conductivity, Btu • in/ft2•h•°F...............................68
W/m • °C.............................................9.8
Electrical Resistivity, ohm •circ mil/ft................................ 776
μΩ•m................................................. 1.29
TYPICAL MECHANICAL PROPERTIES

A nickel-chromium alloy with good strength and excellent resistance to oxidation and carburization in high-temperature atmospheres. It also resists corrosion by many aqueous environments. The alloy maintains a stable, austenitic structure during prolonged exposure to high temperatures. Used for process piping, heat exchangers, carburizing equipment, heating-element sheathing and nuclear steam-generator tubing.

STANDARD PRODUCT FORMS
Pipe, tube, sheet, strip, plate, round bar, flat bar, forgingstock, hexagon and wire.

MAJOR SPECIFICATIONS
UNS N08800
BS 3072 – 3076 (NA15)
ASTM B 163, A 240, B 366,
B 407 – B 409, A 480, B 514,
B 515, B 564, B 751,
B 775, B 829
DIN 470
Werkstoff Nr. 1.4876
VdTÜV 412
ASME SB-163, SA-240,
SB-366, SB-407 – SB-409,
SA-480, SB-514, SB-515,
SB-564, SB-751, SB-775,
SB-829
ASME Code Cases 1325,
1949, 2339, N-20
SAE AMS 5766, 5871
NACE MR-0175/ISO 15156
ISO 9723 – 9725, 6207, 6208

LIMITING CHEMICAL COMPOSITION, %
Ni.......30.0 – 35.0
Fe..........39.5 min.
Cr......19.0 – 23.0
C...........0.10 max.
Mn........1.50 max.
S........ 0.015 max.
Si............ 1.0 max.
Cu........0.75 max.
Al.......0.15 – 0.60
Ti.......0.15 – 0.60
PHYSICAL CONSTANTS AND THERMAL PROPERTIES
Density, Ib/in3(g/cm3)............................................0.287 (7.94)
Melting Range, °F (°C)..............2475 – 2525(1357 – 1385)
Specific Heat, Btu/lb•°F(J/kg•°C)......................... 0.11 (460)
Curie Temperature, °F(°C)....................................-175 (-115)
Permeability at 200 Oersted (15.9kA/m).....................1.014
Coefficient of Expansion, 10-6 in/in•°F(μm/m•°C)
70-200°F (20-100°C)...................... 7.9(14.4)
Thermal ConductivityA, Btu•in/ft2•h•°F(W/m•°C)........80 (11.5)
Electrical ResistivityA, ohm•circ mil/ft(μΩ•m)....... 595 (0.989)
TYPICAL MECHANICAL PROPERTIES

A precipitation-hardenable nickel-ironchromium alloy with additions of molybdenum and copper. It combines the high strength of a precipitation-hardenable alloy with the excellent corrosion resistance of INCOLOY alloy 825. The alloy has outstanding resistance to general corrosion, pitting, crevice corrosion and stress-corrosion cracking in many aqueous environments, including those containing sulfides and chlorides. Used for surface and down-hole hardware in sour gas wells and for oil-production equipment.

STANDARD PRODUCT FORMS
Tube, round bar, flat bar, forging stock and wire.

MAJOR SPECIFICATIONS
UNS N09925
NACE MR-0175/ISO 15156
ASME Code Case 2218

LIMITING CHEMICAL COMPOSITION, %
Ni.......42.0 – 46.0
Fe.......Remainder
Cr.......19.5 – 22.5
Mo..........2.5 – 3.5
Cu..........1.5 – 3.0
Ti.......1.90 – 2.40
Al............0.1 – 0.5
C...........0.03 max.

PHYSICAL CONSTANTS AND THERMALPROPERTIES
Density,Ib/in3.........................................................................0.292
g/cm3......................................................................... 8.08
Melting Range, °F...................................................2392 –2490
°C...................................................1311 – 1366
Specific Heat,Btu/lb•°F.....................................................0.104
J/kg•°C............................................................ 435
Permeability at 200 Oersted (15.9kA/m).....................1.001
Coefficient of Expansion, 70 – 200°F, 10-6 in/in•°F........ 7.8
21 – 93°C, μm/m • °C............. 13.2
Electrical Resistivity, ohm •circmil/ft................................ 701
μΩ•m................................................. 1.17
TYPICAL MECHANICAL PROPERTIES

Understanding Incoloy A-286: A Comprehensive Guide to R Pin Pins with International Standards and Equivalent Grades

Introduction:
Incoloy A-286 is a high-strength, corrosion-resistant alloy known for its exceptional performance in high-temperature applications. Among its various applications, R pin pins crafted from Incoloy A-286 offer robust solutions for critical industries like aerospace, automotive, and marine engineering. This article delves into the properties, international standards, equivalent grades, and keywords associated with Incoloy A-286 R pin pins.

Properties of Incoloy A-286:
Incoloy A-286 boasts remarkable properties making it ideal for R pin pin manufacturing:
High Strength: With a tensile strength of up to 140 ksi (965 MPa), Incoloy A-286 ensures reliable performance under extreme conditions.
Corrosion Resistance: Its composition, featuring nickel, chromium, and molybdenum, imparts excellent resistance to corrosion, even in harsh environments.
High Temperature Stability: Incoloy A-286 maintains its mechanical properties at elevated temperatures, making it suitable for high-heat applications.
Oxidation Resistance: The alloy exhibits superior resistance to oxidation, ensuring longevity in demanding operational settings.

International Standards for Incoloy A-286:
Incoloy A-286 conforms to various international standards, ensuring consistency and quality across different markets. Key standards include:
ASTM Standards: ASTM A638/A638M outlines the requirements for precipitation-hardening stainless and heat-resisting steel bars, including Incoloy A-286.
AMS Specifications: AMS 5731, AMS 5732, and AMS 5737 specify the requirements for Incoloy A-286 in the form of bars, forgings, and wire.
EN Standards: EN 1.4980 and EN 1.4944 provide European norms for the chemical composition and mechanical properties of Incoloy A-286.
ISO Standards: ISO 15156 is applicable for the use of Incoloy A-286 in the oil and gas industry, ensuring compatibility and reliability in corrosive environments.

Equivalent Grades of Incoloy A-286:In addition to its primary designation, Incoloy A-286 is known by equivalent grades across different standards. Some common equivalents include:
UNS S66286: This is the unified numbering system designation for Incoloy A-286, recognized internationally.
W.Nr. 1.4980: Incoloy A-286 is also identified by its Werkstoff Number, providing a standardized reference in European systems.
X6NiCrTiMoVB25-15-2: This designation is utilized in some European specifications, reflecting the alloy's chemical composition.

Keywords for SEO Optimization:
To enhance visibility and relevance, incorporate the following keywords throughout the article:
Incoloy A-286
R pin pins
International standards
Equivalent grades
High-temperature applications
Corrosion resistance
ASTM standards
AMS specifications
EN standards
ISO standards

Conclusion:
Incoloy A-286 R pin pins stand out as durable, high-performance components, thanks to their exceptional properties and adherence to international standards. By understanding its composition, properties, and equivalents, industries can make informed decisions regarding the use of Incoloy A-286 for critical applications, ensuring reliability and longevity in demanding environments

Understanding Incoloy A-286 V Anchors: Compliance with International Standards and Equivalent Grades

In the world of specialized alloys, Incoloy A-286 stands out due to its exceptional mechanical strength and oxidation resistance at high temperatures. This makes Incoloy A-286 V anchors ideal for demanding engineering applications, particularly in the aerospace, automotive, and oil & gas industries. This article provides a comprehensive overview of Incoloy A-286 V anchors, highlighting their compliance with international standards and detailing their equivalent grades.

Key Characteristics of Incoloy A-286 V Anchors
Incoloy A-286 is a superalloy composed primarily of iron, nickel, and chromium, and it is known for its durability and corrosion resistance. V anchors made from this alloy are specifically designed to withstand extreme environmental conditions without compromising their structural integrity. The addition of titanium and molybdenum enhances their strength and makes them suitable for high-temperature applications up to 1300°F (700°C).

International Standards Compliance
Incoloy A-286 V anchors conform to several international standards, ensuring their reliability and quality across various applications. These standards include:
ASTM A453: This specification covers the precipitation hardening iron base superalloy for high-temperature service.
AMS 5731, 5732, and 5737: These standards specify the requirements for the alloy in different forms and treatments, ensuring that the anchors meet specific mechanical requirements.

Equivalent Grades
Incoloy A-286 V anchors are equivalent to several other grades in different standardizations, which allows for flexibility and interchangeability across various international platforms. These equivalents include:
UNS S66286: This is the Unified Numbering System designation for Alloy A-286, highlighting its chemical composition and properties.
EN 1.4980: Recognized in European standards, this grade mirrors the properties of Incoloy A-286, ensuring compliance with EU engineering specifications.

Applications and Industries
Due to their robust nature, Incoloy A-286 V anchors are widely used in industries where high-temperature strength and corrosion resistance are critical. These include:
Aerospace: For securing parts in jet engines and turbine components.
Automotive: In exhaust systems and turbochargers where high-temperature resistance is crucial.
Oil & Gas: In offshore drilling equipment and high-pressure environments.

Conclusion
Incoloy A-286 V anchors, adhering to stringent international standards and available in equivalent grades like UNS S66286 and EN 1.4980, offer unmatched performance in challenging environments. Their ability to maintain integrity under high stress and temperature conditions makes them indispensable in the aerospace, automotive, and oil & gas industries. Selecting Incoloy A-286 V anchors ensures a blend of durability, reliability, and compliance, making them a top choice for engineers worldwide.

Introduction:

In the realm of high-performance alloys, Inconel 718 stands out as a pinnacle of engineering excellence. As manufacturers of Inconel 718 rods, we take pride in presenting a detailed exploration of this exceptional material, its equivalent grades, and adherence to ASTM standards.

I. Unraveling the Marvel of Inconel 718:

Inconel 718 is a nickel-chromium-based superalloy renowned for its exceptional strength, corrosion resistance, and high-temperature durability. Its composition, primarily consisting of nickel, chromium, and molybdenum, imparts superior mechanical properties suitable for various demanding applications.

II. Manufacturing Excellence:

Our commitment to quality begins with the meticulous manufacturing process of Inconel 718 rods. Through state-of-the-art techniques and precision engineering, we ensure the rods exhibit consistent metallurgical properties, dimensional accuracy, and surface finish.

III. Equivalent Grades:

Understanding the equivalencies of Inconel 718 is crucial for selecting the right material for specific applications. Our rods adhere to equivalent grades such as:

1. AMS 5662/5663: Complying with Aerospace Material Specifications ensures the rods meet stringent requirements for aerospace applications, exhibiting high tensile strength and resistance to extreme environments.

2. UNS N07718: The Unified Numbering System designation certifies the alloy's conformity to international standards, emphasizing its versatility across diverse industrial sectors.

3. EN 2.4668: This European standard designation reinforces the compatibility of our Inconel 718 rods with European manufacturing and engineering practices.

IV. ASTM Standards Compliance:

Our commitment to quality extends to adherence to ASTM standards, validating the reliability and performance of Inconel 718 rods:

1. ASTM B637: This standard outlines the requirements for nickel-chromium-based alloys, ensuring our rods meet specific chemical composition, mechanical properties, and heat treatment guidelines.

2. ASTM E8/E8M: Ensuring the mechanical properties of our rods are tested using the tension test method, conforming to ASTM standards for tensile testing.

3. ASTM G28: To assess the susceptibility of our Inconel 718 rods to intergranular corrosion, we adhere to the guidelines laid out in ASTM G28.

Conclusion:

Inconel 718 rods exemplify the pinnacle of material engineering, and as manufacturers, our commitment to quality is evident in every step of the manufacturing process. With adherence to equivalent grades and ASTM standards, our Inconel 718 rods stand as a testament to excellence, offering reliability and performance in the most demanding environments. Choose our rods for unparalleled quality and durability in your applications.